TYPFACE KAFKA MAGNETTASTATUR

Included in each Hall-Effect Prebuilt kit:

• Case x1 (Aluminium & Brass)
• Accent x1
• Venom65 Hall-effect PCB x1
• Switches of choice
• Keycaps of choice
• Weight x1 (Brass)
• Plate x1 (Aluminium)
• Feet x4 (Black)
• O-ring 205*3.5mm x1 (50A Silicone)
• Plate Gasket x5 (60A Silicone)
• Carrying Case x1
• Fly Daughterboard x1
• EZmate-JST 150mm cable x1
• Hardware (Pre-installed)

Specification

• Layouts : 65%
• Mount : Gasket Isolation Mount
• Typing Angle : 6 degrees
• Front Height : 22.4mm
• Materials : 6061 Aluminum, C360 Brass, Walnut or Maple
• Weight : 1.6kg (Built)
• Colors: Silver, Warm Gray, Black
• Size: Width 313.9mm, Depth 111.9mm, Height 29.5mm
  

PCB

Control your keyboard with Web-based firmware (https://venom.how/)

• PCB Polling Rate: Up to 8 KHz
• PCB Scan Rate (Per Key): Up to 14KHz
• PCB Latency: 0.16 ms
• RGB Support: None
• Layout: Standard 65% Only
• 1.6mm Thick PCB
• No per Key RGB
• Connector: JST-SH 4 Pin

Materials

Kafka uses

• Walnut/Maple
• PC
• Brass

Natural variances and changes in these materials are to be expected. Wood is a natural material and will vary in grain pattern, colour, texture. Any variations that do not affect the assembly will not be considered as defects.

Keycap

Keycap Material: Doubleshot ABS

Choose among 2 different colorways Black or Beige to make your keyboard better match your setup!

Designed by TYPFACE