GEON TRIMMER

GEON TRIMMER

This tool is used to calibrate the switch stem or keycap so that it will fit properly.

If the switch, stabilizer or keycap stem don't fit properly you can now tune them with the Geon Trimmer. You can reduce the width of the switch and stabilizer stems or increase the width inside of the keycap stem.
Price
Regular price $2700
Regular price Sale price $2700
/

Pairs well with
Specifications
  • Material: STS316L
  • Treatment: Raw
  • Size: 100 x 16mm (3.94 x 0.63in)

Use Guide:

Switch/Stabilizer, "+" Stem Calibration

  1. The trimmer can be used in any direction regardless of the direction
  2. Dimensions change depending on the number of uses by pushing out the stem rather than by cutting it out
  3. Use it several times for switches and keycaps that are not used as tools that require adaptation
  4. Work vertically and horizontally with the stem
  5. The trimmer is a precision tolerance product that is sensitive to impact, so please be careful when using it

Keycap Calibration

  1. Keep the keycap leveled during calibration
  2. Do not use it vertically
  3. If the switch is turned 90 degrees, it must be used vertically
  4. Remove the burr by cutting the stem
  5. Please use it vertically with the stem
  6. The trimmer is a precision tolerance product that is sensitive to impact, so please be careful when using it
You may also like